Samsung Washer Dryer Home Assistant – I have a bad habit of forgetting to put clothes in the washing machine. Clothes are known to stay there for 24 hours after the cycle ends, and they’ll definitely smell like wet dog when I finally remember to take them out.
I decided to solve this problem by using a smart plug to measure the energy consumption of the device connected to it. I thought I could look at the energy used in the wash cycle and use that to find out where in the cycle it’s going, then send me a push notification to my phone. me when the washing machine is finished.
Samsung Washer Dryer Home Assistant
Unfortunately, the push notifications were often sent while I was working upstairs in my office, so I ignored them and forgot about them again. To solve this problem, I now change the color of the LED strip on the stairs near the washing machine to Green when the water is not out. As we walk down the stairs, we can now visually see that the washing machine needs to be emptied.
Automating Washing Machine Reminders With Home Assistant
The door contact sensor mounted on the washing machine door will notify Home Assistant whether the machine is out of water or not and then return the LED strip to normal warm white.
To get started, you need to plug the smart switch into the wall outlet and then plug the washing machine into it.
Important! Make sure the smart plug can provide enough current (amps) to power the washing machine! If you overload the switch, there is a risk that it will catch fire!
Once everything is connected, you’ll need to configure the smart switch to connect to your wireless network by following the instructions that came with the device. Once it’s connected to your wireless network, you’ll be able to add it to Home Assistant using the official Kasa Smart Plug integration.
Shop Samsung Extra Large Capacity Top Load Washer & Electric Dryer With Steam And Smart Care In Ivory At Lowes.com
Once connected to Home Assistant, you will see sensor entities for current (in Amps) and consumption (in Watts). The sensor we will use to figure out which part of the cycle is
Once plugged in, you can run the washing machine and look at the graph to see how many watts are being used during different parts of the cycle.
I tend to use the same wash cycle each time, so the amount of power used in the cycle is consistent from wash to wash. But remember that if you use different programs, especially those with soak cycles in between, your washing machine automation may assume an incorrect state.
Finally, you need a door/window sensor mounted on the washing machine door and connected to Home Assistant. Based on this, we determine whether the washing machine has been emptied or not. If the door is open, we can assume that the clothes have been taken off.
Make Your Washing Machine Smarter With Home Assistant
To monitor the status of your washing machine, you need to create a Dropdown Helper. The easiest way to configure input selection is through the user interface at Configuration->Helper. Click the Add button and then select the Dropdown option. Name it “Washing Machine Status” and add options for each status above.
Now that you have the helper set up, you need to configure some automation to change the state from one state to another when it is enabled and completed.
The first automation will set the status dropdown helper to Active state and send us a push notification that the machine has started.
Automation activates when the washing machine uses more than 1 watt of electricity for more than a minute. I use one
Samsung Wf45b6300ap/us Smart Washer W/ Super Speed Wash, Platinum
To prevent the washing machine from switching between different modes while running a weekly program or similar, I use a condition to set this mode to only
If the trigger and status indicate that the washer is on, we can send a push notification to our phone through the Home Assistant app and set the status to
This automation feature is activated when the washing machine’s energy consumption drops below 0.1 watts for one minute. I found this to work with the washing machine cycle I typically use, but you may need to consider using different values or triggers that work with your own washing machine. The power consumption chart I showed you at the beginning of this post can help you figure out what’s right for your machine’s washing cycle.
I use a numerical state trigger to check if power consumption is below 0.1 watt for over a minute.
Can Smart Samsung Washing Machines Be Started With The Smartthings Integration?
Indicates whether it has been previously enabled or not. If this condition does not exist, the washing machine will set itself accordingly
As soon as I turn it on because the power consumption at idle is the same before and after the cycle is complete.
For this I use Status condition to check if the washer state is currently running or not.
And finally the light turns Green using the Light Turn On service with a beautiful 5-second transition.
Get Notified When Your Washing Machine Has Finished It’s Wash Cycle Using Smart Switches And Contact Sensors — Home Automation Guy
There is one more automation item we need to create, which will set the washer state to Off when the washer door is opened. This way we know whether it is empty or not. This same automation also sent us a push notification to let us know that someone had emptied the washer and also reset that LED strip to its normal color.
This automation feature is activated when the washing machine door contact sensor switches from closed to open. This is done using state automation triggers.
When the door is opened. You can verify this yourself by opening one of the doors and then viewing that contact sensor in the developer tools.
Screenshot of Home Assistant showing a notification sent to my phone indicating that the washer was out of water.
Best Washing Machine To Integrate With Home Assistant?
And finally, it uses the Call Service action to call the Turn on the light service and reset the light to 375 mired, which is the warm white light I use in my house.
These automations look quite complicated when you see them fully documented in a blog post, but once you get the hang of them, they’re quite simple. You can see a more visual explanation and demo of the automation process in the videos below!
Previous Previous How to make lights in your home flash when sensors are activated Next Next Automatically turn on lights when the door is opened A connected smart home is no longer strange to me. I’ve been delving into the world of smart homes since the first smart plugs and light bulbs hit the market, even going as far as automating my air conditioner with a smart infrared transmitter. I even built and wrote about my own smart light strip solution. So when it came time to replace my old washing machine, the choice was obvious: I needed a fully connected appliance. It’s been a few months since I switched to a Samsung smart washer and dryer and the experience has been great. In fact, I firmly believe that this is the future we are all working towards.
When choosing a washer and dryer, I researched several models that fit my budget. Sure, there are some models that claim better cleaning ability or more power than the Samsung I’m looking at, but they don’t have any connectivity. My device of choice ended up being the confusingly named Samsung WD80T604DBX/TL. The Star Trek-inspired name may be hard to remember, but it fits well with the machine’s futuristic black and gray design. But what I’m really interested in happens behind the scenes. With built-in SmartThings-based connectivity, I’m excited to integrate my smart washer and dryer with the rest of my connected home.
Cu. Ft. Extra Large Capacity Smart Front Load Washer With Super Speed Wash And Steam In Brushed Black Washers
I have a Samsung washer and dryer in a dedicated laundry room on a separate floor in my apartment, so the most obvious use case I need is notifications. Of course, the app sends you a helpful alert every time the machine changes state or ends a cycle, but it goes a step further by integrating with my Google Assistant speaker and notifications. loud notification that the washing process is finished – I love it. Alexa users? It also supports that. But it doesn’t stop there. Because I use a 43-inch Samsung Frame TV as a monitor, which also supports SmartThings, I get an on-screen notification when the laundry is done. This is super important to me because I have a habit of forgetting to put my clothes in the dryer for days on end.
It will be much more interesting if you have an advanced smart home based on Home Assistant. Integrating the machine into my existing Home Assistant setup was relatively easy, and I was able to take advantage of status changes to trigger audible alerts or change the color of the lights. Via