Best Paint For Mobile Home Ceiling – Mobile home roofs are a popular topic among homeowners. They play a great influence in any room, so it is important that they look good. We’ve already covered how to paint mobile home ceilings, so in this article we’ll cover the different designs of gypsum ceiling panels and how to purchase replacement panels.
Most older mobile homes and prefab homes (or lower-end, more affordable models) have plaster ceilings instead of drywall.
Best Paint For Mobile Home Ceiling
Gypsum is a natural mineral used for blackboard chalk, drywall, and mobile home siding. It is affordable, lightweight and requires no finishing, making it a perfect material for ceilings. Prefabricated house manufacturers use gypsum wall and ceiling panels.
Paint Colors Realtors Say Increase Your Home’s Value
Gypsum ceiling panels are close cousins to drywall. The main difference is that drywall is usually thicker and has paper wrapped around it to soften it. Mobile home gypsum panels are not smooth, they have a light texture that most homeowners don’t like.
Gypsum panels usually span the entire width of a single-wide or half-wide double. They are usually 16″, 24″ or 48″ wide and 5/16″ or 1/2″ thick.
There are four main disadvantages of old gypsum ceiling tiles. First of all, they are delicate and easily damaged. Second, the ceilings of older mobile homes tend to sag or not fit the trusses. Eventually they turn yellow. Popular mobile home ceiling designs
The following image shows a typical 4 foot wide gypsum ceiling tile system with light texture. Notice the roses?
Here’s What To Consider Before Applying A Semi Gloss Paint To Your Kitchen Ceiling
One of the most common mobile home ceiling designs are 4-foot-wide ceiling panels screwed to the roof trusses every 24″ or 16″ (the typical space between roof trusses). Flat plastic covers where two seams meet and rosettes are used in the trusses between the seams.
Rosettes are decorative washers used on screws to attach ceiling panels to the roof truss. They are screwed to each roof truss except where the two panels meet. In the photo above, the rosettes are used 16″ apart on a 48″ wide panel (i.e. the trusses are 16″ apart). A splint, also known as a spline or stripe, covers the seams where two plates meet.
The mobile home ceiling panels are 4 feet wide and feature channel batten cover screws and rosette washer seams.
Another mobile home ceiling design uses 16″ – 24″ wide ceiling panels with a groove covering the seams where the two panels meet.
Sleek Ceiling Tile Colors For Your Commercial Space
Dodi Dollendi recently painted the ceiling of his mobile home. Since the panels are made of plastic, you may see more yellow than the panels themselves.
Ducted ceiling dividers are another way to install ceiling panels. The lip is attached to the top of the truss and the front panel rests on the C-channel.
Another popular method for installing gypsum ceiling panels in a mobile home are these composite strips. They are glued at the seams of the panels. You need to loosen one of the ends and then use a serrated blade to slide it behind to loosen the adhesive and pull the strip down.
Many ceilings in older mobile homes feature flat battens (also called splines or strips) that cover the seams where each panel meets. However, some builders have gotten a little more creative and given their ceilings a mini-coffered design with dimensional beams, aka false beams.
The Best Paint Colors For Selling Your Home
April Lee West recently purchased this amazing mobile home with lighted beams. I hope he keeps them!
This mobile home has a more rustic design with wooden beams that hide some seams and help reach the gable roof of the front door:
To use shorter ceiling panel lengths and give the home a custom coffered ceiling design, some home builders install false beams that run straight down the center of the ceiling and on each side to cover the ceiling panel seams.
This home has large beams running down the center of the ceiling and every 4′ on the sides to cover the seams.
Manufactured Homes: Settling Can Be Unsettling
It would make life a lot easier for owners of less mobile, prefabricated homes if we could actually find and purchase replacements for our homes. Bathtubs, doors, vinyl siding and plaster ceiling tiles are hard to find and expensive if you can find them.
Your best (and perhaps only) chance of finding the gypsum ceiling tiles you need is at your local mobile home supply store. Seaspray, a brand name for gypsum ceiling panels
We recommend asking your local mobile home supply store for gypsum ceiling panels. The most common brand is National Gypsum’s Seaspray brand high-strength MVR ceiling panels, but many mobile home suppliers sell them.
Instead of sea spray. I’m not sure if it’s a licensing thing or if it’s a completely different product, to be honest.
The Best Paint Numbers For Your Home: 60 70 (lrv)
If you can find a local mobile home supply store that sells them (or orders them for you) consider yourself lucky. But this still doesn’t help because you need a panel with your layout.
Suppliers do not deliver or ship these panels and do not offer any warranty or exchange after ordering because they are very easy to damage and difficult to maintain.
Seaspray panels are available in 5/16″ and 1/2″ thicknesses and are 4 feet wide and 84-192″ long. You will probably want 5/16″ panels 4 feet wide and up to the width of your single-wide mobile home (or half of a double-wide).
The 4-foot x 13.9-foot, 5/16-inch thick panels cost about $58 last time I looked. If you are repairing or patching a ceiling panel, you will need to order the original size of the panel.
Wood Ceiling Ideas That Add Rustic Charm
Tip: If you can find these panels, buy at least 15% more than you need to cover damage and installation errors.
Truth be told, your best bet for replacing mobile home ceilings is probably drywall or one of our favorite mobile home ceiling replacement materials that we’ve listed in this article.
Have you replaced the ceiling in your mobile home with unique or creative materials? Have you replaced the ceiling with drywall? We’d love to see you and hear from you in our new Facebook group, Mobile Home Living: Remodeling and Repair. We’ve managed to get over 2,000 members in just a few months and everyone is so friendly, supportive and helpful.
Stay connected and receive updates with special content on the 1st and 15th of every month. Free gift for new subscribers!
Office Paint Colors And Inspiration
Crystal Adkins began living in a mobile home in 2011 after purchasing a 1978 mobile home and searching online for mobile home renovation ideas, but she found very little. Today it is America’s most popular resource for mobile home information and inspiration and has been visited more than 40 million times.
Trending Now Mobile Home Plumbing Guide Diagnose and Fix Common Venting Problems in Your Plumbing System How to Paint Vinyl Walls in a Mobile Home (and Remove Battens) Guide to Removing Walls in a Mobile Home Check it out Check out this post to learn how to care for the walls and ceilings in your new home.
It’s important to keep all parts of your prefab or modular home in great condition so you can continue to create lifelong memories in your home. You may not think about maintaining the walls of your home, but they are just as important as other areas of your home.
Taking care of the walls in your home can be as simple as small projects like minor repairs and paintings. Find out how to maintain the walls of your prefab or modular home.
Southern Home Paint Color Palette
Have you ever wondered what types of materials are used in the walls of a prefab home? The walls of many manufactured homes are made of materials such as drywall and vinyl siding. Drywall is commonly used for prefabricated home walls, but vinyl-clad walls have their advantages.
Both drywall and vinyl-coated wallboard have their advantages. Drywall often offers more design options, such as space for a built-in TV, and has a slightly higher insulation value than some thin vinyl panels. However, vinyl panels are easier to clean because they don’t absorb liquids as easily as drywall.
Minor repairs to your manufactured home’s drywall include patching a couple of holes, driving blunt nails (when the nail comes loose from the drywall), and filling small cavities. Remember that you will need to touch up the paint on any areas of the drywall you are repairing.
Repairing vinyl-coated wallboard is a little more complicated than repairing drywall. For major fixes, we recommend calling an expert to do the job. Minor repairs can be repaired in the same way as regular drywall, however you need to prepare the wall differently.
Design Trends For Your Manufactured Home
To prepare vinyl walls before repair, wash the entire surface with a cleaner containing trisodium phosphate. Removes stains and dirt so that the new paint or coating adheres better to the surface and without stains.
Adding a fresh coat of paint to the walls is a great way to update an interior
Best paint for ceiling tiles, best paint for the ceiling, best paint for ceiling, ceiling fan for mobile home, best paint for bathroom ceiling, ceiling panels for mobile home, best white paint for ceiling, best ceiling fans for home, best paint for kitchen ceiling, best paint for popcorn ceiling, best finish for ceiling paint, best color for ceiling paint