Best Paint For Exterior House Foundation

By | June 4, 2025

Best Paint For Exterior House Foundation – Step-by-step tutorials for painting exterior concrete walls, including foundations, stucco, masonry, porches and cement. Get expert tips for a professional finish and durable, low-maintenance protection that extends the life of your concrete surfaces.

Just like an old patio or home exterior that needs to be refinished, concrete surfaces also experience wear and tear over time. Painting concrete or cement hides unsightly damage and discolouration and provides a pleasant refreshment. When I was renovating my parents’ house last summer, it became clear that the exterior brickwork needed to be renovated.

Best Paint For Exterior House Foundation

Concrete paint or stain not only provides a pleasant aesthetic, but also provides a protective layer that extends the life of the surface. Whether it’s your home’s foundation, porch or landscape walls, painting concrete makes it easier to clean and maintain. Preparation and good product selection are the keys to success.

How To Paint Concrete In 5 Steps

Today we focus on low-traffic wall surfaces such as foundations, stucco, basements and cement walls. For more information on painting floors, check out our article on painting garage floors.

Although this home is log cabin style, the process is exactly the same for areas such as cement or brick foundations, concrete block walls, and mortar stucco walls.

A hand grinder with a diamond grinding disc with a diameter of 10 cm is suitable for most irregularities. The paint I recommend has very good coverage and has the ability to fill hairline cracks, but cannot cover poorly repaired or peeling surfaces.

If the area has been previously painted and the paint on the area is peeling (peeling, cracking or peeling), remove any loose paint with a metal scraper and sand the edges smooth with a concrete grinder.

How To Choose Exterior Paint Colors For A Brick Home

Several problems can arise when painting exterior brick and concrete. Some of the challenges we had to overcome were:

The first step starts with a clean surface. Clean and dry the concrete thoroughly. Since we stained and mortared the entire house, a pressure washer and an exterior cleaner or mold remover worked very well. It was amazing how much dirt and mold came off!

If I had to do this again, I wouldn’t use a tube of pre-mixed concrete patch. It’s difficult to work with. Half of them jumped out the back and made a terrible mess. The texture is sticky and too thin to apply to walls. We’ve tried several brands with no more luck.

Normally I would have mixed the mortar to the consistency of thick peanut butter to fill in the gaps. If you have small cracks, you can use a joint bag like this. It is similar to the piping bag you use to frost cupcakes.

Exterior House Paint: How To Choose The Right One

You can also use quick-setting hydraulic cement this way to fill cracks in your walls. As an added bonus, it acts as a waterproofing agent against leaks.

In most cases, concrete has a surface that is too rough and porous to require a primer. An exception can be made for certain stains that may bleed. In these cases we recommend a high-quality sealer-like paint. To avoid confusion, the paint I recommend has the added benefit of a waterproof sealer. It can be epoxy or acrylic paint, so no additional products are needed.

However, if you have a stubborn stain and have removed as much of the dirt and oil on the surface of the stain as possible, it is best to give the first coat time to dry and completely seal before applying a second coat.

This is where the fun begins! Concrete sealants or paint designs can be used on concrete and masonry surfaces. Do not use latex paint! My recommendation for the product is for vertical areas or areas with low traffic. The paint I recommend can be used on concrete patio floors and pool decks, but you will probably want to use a thicker coating material that provides extra protection. I have not used these specific products for that application.

Best Exterior Paint Color Combinations

For a project for my parents’ house, I painted all of these surfaces with a brush. For larger areas where the texture is not too thick, a roller and long-handled paint wand are better.

Notice how much more vibrant and uniform the stones look. I used a light gray color to give the stain a brighter contrast. This paint is made specifically for brick, so you know it will be durable and look great for years to come.

There are several choices for vertical exterior surfaces such as basements and foundation walls. They are all durable and will not fade over time.

Behr Dry Plus is a waterproof paint that helps solve moisture problems. Withstands water pressure up to 12 PSI. This paint is suitable for basements or areas with a high moisture content. Although paint cannot replace water leakage problems, this paint is a high-quality waterproofing material. A drawback? This product is available in a limited color choice.

The Best White Exterior Paint Colors

On the other hand, Behr Masonry, Stucco and Brick paints are excellent for exterior applications where pressure-dependent waterproofing is not required. It has excellent covering power, covering power, adhesion and water repellency. This is the product we chose for our outdoor application and we are very pleased with the results.

A final consideration is Behr elastomeric masonry, stucco and brick paint. This product is mainly used for leveling surfaces. It can fill hairline cracks, but it doesn’t work miracles. Still need to patch the bigger one.

Most brands of exterior concrete paint suggest they will last approximately 3 to 5 years. Depending on the wear and tear it is exposed to, it may last longer. It also helps prevent water from seeping into the exposed concrete and causing damage.

Concrete paints and stains help lighten discolorations, stains and signs of surface aging. It can also extend the life of your concrete by preventing further damage and making it easier to clean.

How To Paint A Brick House (and The Siding!)

Both have advantages and disadvantages. Concrete stains add color to the surface, but do not provide significant protection without an additional sealer. Opaque concrete paint covers the top of the concrete and reduces the visibility of stains. However, if applied incorrectly, it can crack or peel.

PS I love seeing your creations! Take a photo and tag #cravingcreative on Instagram! You can stay in touch with me by following me on Instagram, Pinterest and subscribing to my newsletter!

How to paint foundations, stucco, masonry and concrete exterior walls such as verandas and cement. Get expert tips for a professional finish and durable, low-maintenance protection that extends the life of your concrete surfaces.

Wet areas: Behr Dry Plus is a waterproof paint that helps solve moisture problems. Withstands water pressure up to 12 PSI. This paint is suitable for underground cellars, for example.

Painting The Exterior Of Our House With The Projectcolor App

Outdoor applications: Behr Masonry, Stucco and Brick Paints are excellent for outdoor applications where pressure-dependent waterproofing is not required. It has excellent covering power, covering power, adhesion and water repellency.

Uneven surfaces: Behr resilient brick, stucco and brick paint. This product is mainly used for leveling surfaces. It can fill hairline cracks, but it doesn’t work miracles. Still need to patch the bigger one. Many people wonder whether they should paint the foundation of their home. For many people, concrete foundation walls are an eyesore and they wonder if they should paint their foundation. There are a few different schools of thought, but generally you should paint the basics. The main reason to paint the foundation is to increase the aesthetic value of your home and decrease the curb appeal of your home. Additionally, high-quality exterior paint can further protect your home from UV or moisture damage. Additionally, most homes have concrete foundations and the process of applying concrete is actually quite simple. In the remainder of this article, I’ll explain the pros and possible cons of base painting and guide you through the process of painting your base. We will also share with you several products that you can use to apply foundation. Why should I apply foundation? Concrete is the most common type of foundation used in homes. They are usually visible above ground level, but are also visible under the siding. Many homeowners simply choose to leave it as is, and that’s fine. But painting your home not only looks more attractive, it also helps protect your foundation from damage. Painting the foundation makes your home less susceptible to water damage and UV damage. Modern paint products can cover concrete for up to 10 years without peeling and can make your foundation look a little nicer than dull gray or white. Water and UV rays are the biggest enemies of outdoor surfaces. Concrete is generally a very durable material, but is vulnerable to water and sunlight. Over time, this exposure can cause the concrete to begin to crack or crumble.

Paint for exterior concrete foundation, best exterior paint for foundation, paint for exterior house, best exterior foundation sealer, waterproofing membrane for foundation exterior, paint for exterior foundation, best exterior foundation coating, paint for exterior foundation walls, best exterior foundation waterproofing systems, best exterior foundation paint, best paint for exterior foundation walls, exterior house foundation paint